Our Products
>>
AC Motors
-
-
Baldor's extensive line of General Purpose motors are available in ODP and TEFC construction in both Single and Three Phase. Horsepower sizes available from stock range from 1/12 HP through 1500 HP.
-
-
Super-E Motors are designed to conserve energy over extended time periods. These premium efficiency designs are available in both Totally Enclosed Fan Cooled and Open Drip Proof construction. All three phase motors are Inverter Ready per NEMA Standard MG1
-
-
Baldor's line of brake motors are available in totally enclosed fan cooled, open drip proof, or explosion proof designs, in either single or three phase. Stock ratings are available from .25 horsepower through 30 horsepower. These motors use a mechanical
-
-
Baldor's new Definite Purpose Commercial Motor line offers many new ratings designed for applications with low to medium starting torque requirements. The Baldor Commercial Duty Motor line brings Baldor's reputation for high quality designs to commercial.
-
-
Baldor's Explosion-proof motors are ideal for a wide variety of applications where hazardous fumes or dust may be present. The motors are available in three phase and single phase with ratings, in stock, from 1/4 HP through 300 HP. Designs available inclu
-
-
These Unit Handling Motors are designed for many of the varied of applications, such as Unit and Baggage handling, conveyors and other applications requiring frequent starting and stopping. Horsepower sizes available range from 1/2 HP -10 HP.
-
-
Baldor's extensive line of 200 Volts, General Purpose motors are available in Open Drip-proof and TEFC construction in three phase. Horsepower sizes available from stock range from 1/2 HP through 100 HP.
-
-
Baldor's extensive line of 575 Volts, General Purpose motors are available in Open Drip-proof and TEFC construction in three phase. Horsepower sizes available from stock range from 1/3 HP through 250 HP.
-
-
These motors are designed for many of the varied applications found on the farm. Designs include motors suitable for aeration fans, auger drives, grain stirring, metering pumps, instant reversing, irrigation tower drives, and crop driers. General purpose
-
-
Baldor Define Purpose Motors are available in both TEFC and ODP designs. Constant torque or variable torque motors having one winding or two winding. Applications for these motors include fans, blowers, pumps, machine tools, hoists and conveyors.
-
-
Severe Duty motors are available from 1 HP to 500 HP. These products are especially designed for those applications requiring protection of the motors from severe environmental operating conditions. A few typical applications which might require these typ
-
-
Baldor's line of 50 Hertz motors are available in totally enclosed fan cooled, open drip proof, or explosion proof designs, in either Single or Three phase. Applications where only 50 Hertz power is available.
-
-
Baldor's line of Heating, Ventilation, and Air Conditioning Motors are designed with dynamically balanced rotors for reduced vibration and quiet operation. The motors range in size from 1/4 HP to 75 HP and include heavy duty industrial designs as well as
-
-
Baldor's line of Metric Dimension Motors are designed in IEC Frames from D63 through D200L. The motors are available from stock in 50 Hz or 60 Hz. This means that replacement 60 Hz motors are readily available from Baldor to replace metric motors that hav
-
-
Inverter Drive Motors are wound with 200 degree C. moisture resistant ISR (Inverter Spike Resistant) magnet wire which dramatically extends the life of the motors compared to motors wound with non-ISR wire. The motors available from stock range in size fr
-
-
Our pump line of motors includes single or three phase jet pump motors, square flange motors, close-coupled pump motors, and P-Base vertical solid shaft pump motors. The motors are stocked in totally enclosed fan cooled, open drip proof, and many explosio
-
-
Baldor's Washdown Duty Motors are available from stock in single and three phase AC and in DC designs. Horsepowers range from 1/2 to 20. Designs include motors having an electostatically applied epoxy finish, paint free with major components in 300 series
