JMFSWDM3558T-E, 2 Hp, 1800 Rpm, 145JM FR, 230-460 Vac, 3 PH,
JMFSWDM3558T-E, 2 Hp, 1800 Rpm, 145JM FR, 230-460 Vac, 3 PH, TEFC, Stainless Steel, Close-Coupled Pump Motor
Engineering Data
Output 2.000 hp
Phase 3
Synchronous Speed 1,800 rpm
Frequency 60.00 Hz
Voltage 460 V
230 V
Frame Material Stainless Steel
Frame 145JM
XP Class and Group NONE
XP Division Not Applicable
Brand Baldor-Reliance
Agency Approvals CSA
UR
Ambient Temperature 40 °C
Auxillary Box No Auxillary Box
Auxillary Box Lead Termination None
Base Indicator Rigid
Bearing Grease Type POLYREX EM (-20F +300F)
Blower None
Current 5.7 A @ 208 V
5.4 A @ 230 V
2.7 A @ 460 V
Design Code B
Drip Cover No Drip Cover
Duty Rating CONT
Efficiency @ 100% Load 88.5%
Electrically Isolated Bearing Not Electrically Isolated
Feedback Device No feedback
Front Face Code Standard
Front Shaft Indicator None
Heater Indicator No heater
High Voltage Full Load Amps 2.7 A
Insulation Class H
Inverter Code Inverter ready
KVA Code L
Lifting Lugs No Lifting Lugs
Locked Bearing Indicator Locked Bearing
Motor Finish Unpainted
Motor Lead Exit KO Box
Motor Lead Quantity/Wire Size 9 @ 18 AWG
Motor Lead Termination Flying Leads
Motor Standards NEMA
Motor Type 3538M
Number of Poles 4
Overall Length 18.40 in
Power Factor 78
Product Family WD All SS Encapsulated
Pulley End Bearing Type Sealed Bearing
Pulley Face Code C-Face
Pulley Shaft Indicator Tapped & Key
Rodent Screen None
RoHS Status RoHS Compliant
Service Factor 1.15
Shaft Diameter 0.875 in
Shaft Extension Location Pulley End
Shaft Ground Indicator No Shaft Grounding
Shaft Rotation Reversible
Shaft Slinger Indicator No Slinger
Speed 1,755 rpm
Speed Code Single Speed
Starting Method Direct on line
Thermal Device - Bearing None
Thermal Device - Winding None
Vibration Sensor Indicator No Vibration Sensor
Winding Thermal 1 None
Winding Thermal 2 None
Click To Enlarge
- Item #: JMFSWDM3558T-E
