JMSSEWDM3711T, 10 Hp, 3600 Rpm, 215JM FR, 230/460 Vac, 3 PH
JMSSEWDM3711T, 10 Hp, 3600 Rpm, 215JM FR, 230/460 Vac, 3 PH, TEFC, SSE Super-E Stainless Steel, Close-Coupled Pump Motor
Engineering Data
Output 10.000 hp
Phase 3
Synchronous Speed 3,600 rpm
Frequency 60.00 Hz
Voltage 460 V
230 V
Frame Material Stainless Steel
Frame 215JM
XP Division Not Applicable
Brand Baldor-Reliance
Agency Approvals CSA
UR
Ambient Temperature 40 °C
Auxillary Box No Auxillary Box
Auxillary Box Lead Termination None
Base Indicator Rigid
Bearing Grease Type POLYREX EM (-20F +300F)
Blower None
Current 23.0 A @ 208 V
21.2 A @ 230 V
10.6 A @ 460 V
Design Code A
Drip Cover No Drip Cover
Duty Rating CONT
Efficiency @ 100% Load 91.7%
Electrically Isolated Bearing Not Electrically Isolated
Feedback Device No feedback
Front Face Code Standard
Front Shaft Indicator None
Heater Indicator No heater
High Voltage Full Load Amps 10.6 A
Insulation Class H
Inverter Code Inverter ready
KVA Code L
Lifting Lugs Standard Lifting Lugs
Locked Bearing Indicator Locked Bearing
Motor Lead Exit KO Box
Motor Lead Quantity/Wire Size 9 @ 14 AWG
Motor Lead Termination Flying Leads
Motor Standards NEMA
Motor Type 3744M
Number of Poles 2
Overall Length 22.75 in
Power Factor 94
Product Family Washdown All Stainless
Pulley End Bearing Type Sealed Bearing
Pulley Face Code C-Face
Pulley Shaft Indicator Tapped & Key
Rodent Screen None
Service Factor 1.15
Shaft Diameter 0.875 in
Shaft Extension Location Pulley End
Shaft Ground Indicator No Shaft Grounding
Shaft Rotation Reversible
Shaft Slinger Indicator Shaft Slinger
Speed 3,500 rpm
Speed Code Single Speed
Starting Method Direct on line
Thermal Device - Bearing NONE (OLD)
Thermal Device - Winding None
Vibration Sensor Indicator No Vibration Sensor
Winding Thermal 1 None
Winding Thermal 2 None
Click To Enlarge
- Item #: JMSSEWDM3711T
